Please be aware that the mouser cart does not contain the designation for placement. The buttons contain the documentation for values and placement. 

600T:

VALUES AND PLACEMENT 600T

http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=78e19d7ccc

http://www.digikey.com/short/3b15hc

200T:

VALUES AND PLACEMENT 200T

http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=6953d64c48

http://www.digikey.com/short/3b15hc

THE NEW DRIP 600/600 OHM 200/200 OHM STEPPED BRIDGED 'T' ATTENUATOR

 

DRIP is pleased to announce the production of the ULTRA 'T' ATTENUATOR 

designed for 600 ohm or 200 ohm sources. 

ANY IMPEDANCE OF A BRIDGED 'T' ATTENUATOR MAY BE ACHIEVED (tested and intended for 600/600 or 200/200 OHMS)

gold plated / hard gold plated contacts and black sold mask / 3 oz copper on a .062 FR4 substrate (ROGERS substrate in review)

a solid plane of grounded copper on one side of each deck for shielding . 

 

the drip attenuator is designed around a SEIDEN 23 position dual deck shorting rotary switch with a beautiful throw and feel , a tactile response that reflects the quality.

the pcb attaches directly to the gold plated wiper of each deck ,

6 microns of gold plating on all contacts.

multiple connection options : 2.54mm spaced I/O pad and holes  allows use of termal blocks / IDC shielded ribbon cables / wire to board IDC terminals / or solder direct to board .

3.5 x 2.6 inches